This is a place for the file archives of the Shop-Talk list. I am in no way responsible for the content of the Shop talk list, nor the accuracy of any of these file. If a file here is violating a copyright law, please let me know and I will remove it. This site is based on a "trust fellow shop keepers" basis. Please don't abuse it.
File type:
Plans
File description: Welding Hints Your name: (optional) John Niolon follow up by Donald
File: Click here to d/l...
Welding hints page and the 90 degree jig is below
It's for the Metal Manglers home page and includes projects, tips and angle
iron construction articles... some good info here including the 90 degree
jig for perfect corners..hope this is what you're looking for. look around
in his project pile...he gives good description on building tables...
http://metalmangler.homepage.com/mmindex.htm
_____________________________________
Please remember to limit your acetylene consumption to 1/7 of your
cylinder volume per hour (75 cu.ft. cylinder -> 11 cfh) for safety.
If you exceed this number, you'll start pulling acetone out of the
cylinder along with the acetylene, and the remaining acetylene can go
unstable. Or the acetone will destroy your regulator. Either way,
it's bad bongos.
Rosebuds often draw huge quantities of gas -- the smallest I could
find (heating metal for casting) drew 25 cfh @ 5 psi.
Donald.